PTE7300-24AM-1B100SN壓力傳感器Sensata森薩塔
發布時間:2024-07-15 10:15:22 瀏覽:2037

| Electrical | ||
| Pressure Ranges | 0-10 barto0-600 bar (0-145 psi to 0-8700psi | |
| PressureReference | Gauge(Module)and Sealed Gauge [fully hermetic sensor | |
| Supply Voltage | 3.3VDC to 5.5VDC | |
| Digital Interface | FC with CRC(memory integrity,and data transmission) | |
| Device Address | 0xDA (including CRC 0x6C(excluding CRC | |
| Operating Current In Sleep Mode | 6.5uA(typical) | |
| Operating Current In Active Mode | 3.7mA typical (4mAmaximum) | |
| AvailableData | Pressure int16 Bridge temperature [int16]2 Status [int16 Device seria (int32) | |
| Resolution | 15 bit | |
| Response Time | <1ms@Default setting and active mode | |
| Probe Configurations | On-demand,single cycle | |
| Recommended pull-up resistors | 1kOhm to 10kOhm,depending on cable length | |
| External Capacitive Load for I2C Bus Line | 400 pF max|depends onthe cable length | |
| ESD | ±4KV Contact;±8KV Air | |
| Radiated Immunity | 80-1000MHz10V/m 1400-2000MHz 3V/m 2000-2700MHz 1V/m | |
| Conducted Immunity | 0.15-80MHz3Vrms | |
| Magnetic Immunity(1 | 3 A/m for 5 minutes | |
| Physical | ||
| Proof Pressure | 60bar forfull scale pressure=10-29bar 200barfor full scale pressure=30-100bar 500barfor full scale pressure=101-250bar 800barfor full scale pressure=251-400bar 1200bar for full scale pressure=401-600bar | |
| Burst Pressure | 200barfor full scale pressure=10-29bar 2000bar forfull scale pressure=30-100bar 2500bar forfull scale pressure=101-250bar 4000bar forfull scale pressure=251-600bar | |
| Vibration | EC 60068-2-6with 2.0mm displacement,Sensor:30g(10..2000Hz);Module:20g(10..2000Hz) | |
| Mechanical Shock | IEC 60068-2-27,50g min(Modulel;IEC 60068-2-27,500g min (fully hermetic sensor) | |
| Drop (any Axis) | 1m | |
| Water Hammer | 1.6X full scale pressure for 100k cycles,1.3xFS for200k cycles | |
| Ingress Protection | IP00 (Module),IP69K(fullyhermeticsensor | |
| Media Compatibility | Fluids and Gases compatible with 17-4PH stainless steel | |
| Performance | ||
| Pressure(Best Fit Straight)3 | ±0.25%FS@25℃ | |
| Pressure(Total Error Band)0 | +/-1.5%FS@-20°to 85°℃ | |
| Operating Endurance | >10M cycles | |
| 0perating Ambient Temperature | 40°to+100℃ | |
| Operating Media Temperature | 40°to+125℃ | |
| Storage Temperature | 40°to+125℃ | |
Sensata森薩塔成立于1916年,專注于提供傳感器、控制器產品和服務,產品廣泛應用于交通運輸、樓宇暖風空調控制、工業、能源以及航天航空等領域。深圳市立維創展科技有限公司優勢渠道提供Sensata傳感器產品,歡迎咨詢。
相關推薦:
推薦資訊
Dytran 1210C 系列被認為是一項環形壓電荷模式力傳感器,其靈敏度高達18 pC/lbf,甚至能夠在+400°F (+204°C)的極高溫環境下可靠運行。這些傳感器在外觀上相似,因此業內人士常將其稱為“強制清洗器”。設計這些設備的初衷是為了測量機械和其他應用中快速或慢速變化的動態力,在操作中,用戶可以通過螺栓或螺釘將傳感器固定在預加載狀態下。
Dytran 3603系列三軸IEPE加速度計傳感器是一款輕巧且堅固的振動和沖擊測量工具,采用鈦合金外殼,重量?jī)H30g,尺寸為19.1 x 19.1 x 28.6 mm,易于安裝。量程500/1000/5000 g、靈敏度1/5/10 mV/g、頻率響應0.3至5000 Hz、線性±1% F.S.、工作溫度-51至121℃、固有頻率>25 kHz、4針1/4-28徑向連接和10-32螺柱安裝。應用范圍廣泛,是工程師和科研人員進行精確振動和沖擊測量的首選。
在線留言